Instrumentation Lab Trainers

Product Details:

Seeps of Learning:

• Characteristics of filament Lamp
• Characteristics of Photovoltaic Cell
• Characteristics of Photoconductive Cell
• Characteristics of Photo transistor
• Characteristics of PIN Photo diode
• Light Controlled Switch System

Technical Specifiution:

• Transducers: 4Nos.
• Photoconductive Cell
• Photovoltaic Cell
• Photo transistor
• PIN Photo diode
• Light Source: Filament Lamp
• Signal Conditioning Circuitry
• Power Amplifier
• Current Amplifier
• DC Amplifier
• Cooperator
• Electronic Switch
• Buffer
• Input Circuits: RotaryIESlide Potentiometers

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Experimental Training Board has been designed specifically for the measurement of Inductance of a coil by Anderson Bridge. It indudes audio amplifier with speaker for null detection (Instead of head phone) and one KHz sine wave oscillator Instead of externally used decade audio frequency generator The board Is absolutely self contained and requires noother apparatus. Practical experience on these boards carries great educative value for Science and Engineering Students.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 250 pieces per month
• Delivery Time: 2-3 week
• Packaging Details: you can contact us or write to us for any product related query

Product Details:

Features:

• Two Decade Resistances, each with single dial in steps of to from the two arms of the bridge.
• Two Decade Capacitors, each with single dial in steps of 0.1mF total 1mF, to form the other two arms of the bridge.
• A High Impedance Head Phone, for detecting the null position.
• Patch cords.

Additional Information:

• Item Code: VE-2542
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 250 pieces per month
• Delivery Time: 2-3 week
• Packaging Details: you can contact us or write to us for any product related query

Product Details:

Instrumentation trainer has been designed specifically for to study Linear Variable Differential Transducer (L.V.D.T.). The board is absolutely self contained & require no other apparatus.

Additional Information:

• Item Code: VE-4200
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 200
• Packaging Details: You can contact us or write to us for any product related query.

Product Details:

Looking to the recent requirement of educational institutions, we have developed. Load Cell Demonstrator. It shows digital display of measured weight.

Additional Information:

• Item Code: VE-4203
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 250
• Packaging Details: You can contact us or write to us for any product related query.

Product Details:

Oscilloscope Demonstrator Trainer is specifically designed for the study of working of an oscilloscope in an open form. The Controls are placed actually at the place as they are in the layout schematic. Thus a trainee can easily locate any section, & components in the section and study it thoroughly. The function controls and the adjustment controls are fully accessible to the trainee to verify their effect on the working of the scope. Creation of Faults and rectification of faults are important exercise covered in the experiments. An illustrated Block and Circuit Schematic and the adjustment plan right in front of the trainee's eyes helps him to correlate each operation during the demonstration.

Features:

• Oscilloscope in open form with all components and controls placed on single PCB.
• Amplifier, Time base, Channel section signal available on test points.
• Separate sections for PS, EHT, VA, HA, TB & Trigger for easy identification.
• Fault creation & rectification provided.
• Track printing with different colours on different sections on component board for easy circuit training.
• Legend Printing on PCB for easy identification of components.
• Can be used as a standard 20 MHz Dual Trace Oscilloscope.

Additional Information:

• Item Code: VE-1106
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 200
• Packaging Details: You can contact us or write to us for any product related query.

Product Details:

Industrial Control Transducer has been designed specifically for measurement and control of temperature using RTD Transducer. The board require other apparatus like heater and beaker.

Measurement and control of temperture using RTD transducer

Feature:

• The unit consists of following built in parts
• IC Regulated Power supply
• Four Op-Amp. ICs
• Relay 12V DC, one change over
• One NPN transistor
• 31/2 digits display panel meter, to display temperature in deg C
• RTD sensor with 3 pin connector
• One switch for setting temperatue on one side and to read actual temperature on other side
• Potentiometer to control temperature
• AC mains socket to connect load whose temperature is to be controlled
• Adequate no. of other Electronic Components
• Mains ON/OFF Switch and Fuse 400mA

Other Apparatus Required:

• Beaker

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 200
• Packaging Details: You can contact us or write to us for any product related query.

Product Details:

Pressure Transducer Trainer is designed to learn concept of Pressure measurement. It helps students & industry professionals to understand operation of Pressure Transducer in detail. Built-in On/Off Controller is also provided with audio & visual indicators. It also has a PC interface through USB for more interactive understanding of transducer characteristics. User can also take a direct printout if desired. Pressure Transducer Trainer has a wide range of experiments with user friendly software.

Features:

• Differential Input Pressure Transducer
• Precise Signal conditioning
• Self-contained and easy to operate
• Data acquisition using USB
• Sensitive, Linear, Stable & Accurate
• Functional blocks indicated on board mimic
• On board Digital Voltmeter
• On board Indicators; Buzzer & LED
• On board On/Off Controller

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

We, Vinamra Enterprises are Manufacturer & Marketer of Test, Measuring & Educational / Vocational / Didactic Technical Training & industrial Equipment for:-

·         ITI College Lab & ITI Tools
·         Polytechnic/Diploma College Lab
·         Engineering College Lab
·         Customized product for any Other Technical need.

Additional Information:

• Item Code: VE-DSO
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

In order to maintain quality conscious image in the market, we are providing world class Universal Motor Speed Controller to the customers. This Universal Motor Speed Controller is ideal to control the speed of motor. Also, it is advance in technology and one can adjust the speed of motor by using this Universal Motor Speed Controller.

 

Features:

• SCR and TRIAC for the speed control of the universal motor
• Two potentiometers
• Two capacitors to control firing angle of thyristors
• DIAC and two Nos. of diodes
• Snubber circuit in parallel with the triac, which helps in improving the Dv/Dt of the device and also helps in reducing the RFI

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)